Furnace, Heating furnace, oil furnace, vacuum furnace, hot air furnace

Microscopes

Sitemap

Partner Sites

Biotechnologies Inc

Phone: +91-9811701133

Email: bio_tin@yahoo.com

info@biotechnologiesinc.com

www.biotechnologiesinc.com

Furnace

As a leading manufacturer and exporter of laboratory equipment our products oven, natural convection oven, forced convection oven, furnace, heating furnace, oil furnace, industrial furnace, hot air furnace, vacuum furnace, clean air oven, industrial convection ovne, laboratory ovens are widely used in research centers and major universities. All these products are durable as well as precise and also cost effective. Our wide range includes:

BTI-1200CB Crucible Box Furnace

BTI-1200CB Crucible Box Furnace 240 Dia x 220 H (mm) up to 1200 C with 30 Segements Temperature Controller

Main Specifications
Inside chamber Size	Dia240 x 220mm
Working Temperature	100-1200℃
Temperature Control	30 segments programmable and PID auto control
Heating rate	<60 minutes to 1000℃
Temperature accuracy	± 2℃
Heating Element	NiCr wire
Working Voltage	AC 220V 50HZ
Max. Power	1.5KW
Net Weight	30kg

BTI-1200N Muffle Furnace

Product Description
► Operation Temperature: 1100.C ( 1200.C Max for short time).
► Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation.
► Three sides resistance wire coil for fast and uniform heating.
► Heavy duty double layer structure with cooling fan. Lower temperature in outside case.
► 0.5" diameter observation window made of quartz glass allow user to see insider chamber during heating operation.
► K type thermocouple installed for immediate use.
► Temperature controll unit can be separated from furnace , and make moving at easy.
► PID automatic control via current limiting phase angle fired the resistor , e.g. SCR ( Silicon Controlled Rectifier)

Model: BTI-1200N
Sample size: 200x200x200mm (WxHBTI)

Detailed Description:

Chamber size	200x200x200mm(WxHBTI)
Max.Temperature	1200C
Working temperature	1100C
Temperature accuracy	+ 1.C
Temperature controller	30 segments programmable and auto control
Heating elements	Ni-Cr wire
Voltage	220V 50HZ, single phase
Power	4kw

BTI-1200CF Crucible Furnace

BTI-1200CF Crucible Furnace 240 Dia x 220 H (mm) up to 1200 C with Temperature Controller

Main Specifications
Inside chamber Size	Dia240 x 220mm
Working Temperature	100-1200℃
Temperature Control	One dial button to set temperature easy and one current meter to monitor power running
Heating rate	<60 minutes to 1000℃
Temperature accuracy	± 2℃
Heating Element	NiCr wire
Working Voltage	AC 220V 50HZ
Max. Power	1.5KW
Net Weight	30kg

detailed Description

The Crucible Furnace has larger chamber ( 9.5"dx8.6"H) and it is designed for sintering ceramic parts and component in Lab and Hobby Shop.
The crucible furnace has a unique ceramic fiber insulation around the chamber to provide excellent uniformity and energy efficiency.
The heating element is embedded in the insulation for maximum heat transfer to the chamber. Max. temperature can go 1200 oC
The convenient, top-loading chamber includes an insulated plug and handle for safe removal.
Built in single set point temperature controller is easy to operate. Just set up desired temperature and time, then push button to go.
Four wheels installed in bottom of furnace and easy to mobile
Click the pictures below to enlarge and see more details

BTI-1200 BTI Tube Furnace

Sample size: dia60x300mm (dia2.5"x12")

Main Specifications:

Inside Chamber Size	dia60x300mm(diameter2.5" x 12")
Standard Working Temperature	1100.C ( continuous )
Maximum Working Temperature	1200.C ( < 3 hrs)
Temperature Control	30 steps programmable and PID automatic control
Heating Rate	0~10.C/ min (suggestion: =< 10.C)
Temperature Accuracy	+ 1.C
Heating Element	Fe-Cr-Al resistance wire
Working Voltage	AC 220V Single Phase 60/50 Hz (or according to your requirement)
Max. Power	2 KW
Net Weight	70 Kg

   Note: The furnace tube is quatz tube
         Dia60mm means outer diameter, inner diameter is about 54mm
         300mm means the length of hot zone
         Total length is 1000mm

Standard Sizes:

Model	Chamber size	Max. Temperature
Brother-1200NT	Dia40x300mm (1.5"x12")	1200.C
Brother-1200NT	Dia40x450mm (1.5"x18")	1200.C
Brother-1200NT	Dia60x300mm (2.5"x12")	1200.C
Brother-1200NT	Dia60x450mm (2.5"x18")	1200.C
Brother-1200NT	Dia80x300mm (3.0"x12")	1200.C
Brother-1200NT	Dia80x450mm (3.0"x18")	1200.C
Brother-1200NT	Dia100x450mm (4.0"x18")	1200.C

BTI-1400BTI Tube Furnace

Model: BTI-1400BTI

Sample size: dia60x300mm (dia1.5"x12")

Main Specifications:

Inside Chamber Size	dia60x300mm(diameter2.5" x 12")
BTIandard Working Temperature	1300.C ( continuous )
Maximum Working Temperature	1400.C ( < 3 hrs)
Temperature Control	30 BTIeps programmable and PID automatic control
Heating Rate	0~10.C / min (suggeBTIion: =< 10.C)
Temperature Accuracy	+ 1.C
Heating Element	SiC heating elements
Working Voltage	AC 220V Single Phase 60/50 Hz (or according to your requirement)
Max. Power	5 KW
Net Weight	90 Kg

Note: The furnace tube is High purity Al2O3 ceramic
           Dia40mm means outer diameter, inner diameter is about 32mm
           300mm means the length of hot zone
           Total length is 1000mm

BTI-1400BTI tube furnace is a precision bench-top furnace using quality ceramic SiC rod as heating elements. It is widely used for materials or chemical lab to sinter all types of new materials samples under vacuum or other gases condition. It is controlled by high precision SCR ( Silicon Controlled Rectifier) digital controller with accuracy +/-1.C and 30 segments programmable up to 1400.C.

BTIandard Sizes:

Model	Chamber size	Max. Temperature
BTI-1400BTI	Dia40x300mm (1.5"x12")	1400.C
BTI-1400BTI	Dia40x450mm (1.5"x18")	1400.C
BTI-1400BTI	Dia60x300mm (2.5"x12")	1400.C
BTI-1400BTI	Dia60x450mm (2.5"x18")	1400.C
BTI-1400BTI	Dia80x300mm (3.0"x12")	1400.C
BTI-1400BTI	Dia80x450mm (3.0"x18")	1400.C
BTI-1400BTI	Dia100x450mm (4.0"x18")	1400.C

BTI-1500 BTI Tube Furnace

Note: The furnace tube is High purity Al2O3 ceramic
          Dia60mm means outer diameter, inner diameter is about 52mm
           300mm means the length of hot zone
           Total length is 1000mm
         One zone reach 1600.C, and another reach 1300.C.

BTI-BTItube furnace is controlled by two precision 30 segments digital temperature controllers independently. .
One zone is heated by MoSi2 elements up to 1600.C , and another zone is heated by SiC element up to 1300.C , So
the tube furnace can create various thermal gradient by adjust two zone temperature. It is excellent furnace to
prepare functional materials under thermal gradient, and also can be used for epitaxial film growth by CVD or PVD
with a vacuum system.

Sample size: dia60x300mm (dia2.5"x12")

Main Specifications:

Inside Chamber Size	dia60x300mm( dia2.5" x 12")
Standard Working Temperature	1500.C ( continuous )
Maximum Working Temperature	1600.C ( < 3 hrs)
Temperature Control	30 steps programmable and PID automatic control
Heating Rate	0~10.C / min (suggestion: =< 10.C)
Temperature Accuracy	+ 1.C
Heating Element	MoSi2 heating elements
Vacuum Level	0.1 Torr
Working Voltage	AC 220V Single Phase 60/50 Hz (or according to your requirement)
Max. Power	8 KW
Net Weight	230 Kg

Standard Sizes:

Model	Chamber size	Temperature Range
BTI-	Dia40x300mm (1.5"x12")	1000-1600.C
BTI-	Dia40x450mm (1.5"x18")	1000-1600.C
BTI-	Dia60x300mm (2.5"x12")	1000-1600.C
BTI-MZT	Dia60x450mm (2.5"x18")	1000-1600.C
BTI-MZT	Dia80x300mm (3.0"x12")	1000-1600.C
BTI-MZT	Dia80x450mm (3.0"x18")	1000-1600.C
BTI-MZT	Dia100x450mm (4.0"x18")	1000-1600.C

BTI-1700CB Crucible Box Furnace

BTI-1700M is the most cost effective bench-top high temperature muffle furnace made by. The furnace consists of high quality alumina fiber brick and MoSi2 heating elements with chamber of 8"x8"x8", and temperature is controlled by high precision SCR ( Silicon Controlled Rectifier) digital controller with accuracy +/-1.C and 30 segments programmable up to 1700.C or 3092 oF. It is an ideal tool for materials annealing and sintering in your research laboratory..

Inside Chamber Size	200 x 200 x 200 mm (8"x8"x8", 8 Liter)
Standard Working Temperature	1600.C ( continuous )
Maximum Working Temperature	1700.C ( < 3 hrs)
Temperature Control	30 steps programmable and PID automatic control
Heating Rate	0~10.C / min (suggestion: < 10.C)
Temperature Accuracy	+/- 1.C
Heating Element	MoSi2 heating elements
Working Voltage	AC 220V Single Phase 60/50 Hz (or according to your requirement)
Max. Power	8KW
Outside Size	550 x 540 x 820 mm
Net Weight	170 Kg

Model	Chamber size(WxHBTImm)	Max. Temperature
BTI-1700M	150x150x150mm (6"x6"x6")	1700.C
BTI-1700M	150x150x200mm (6"x6"x8")	1700.C
BTI-1700M	200x200x200mm (8"x8"x8")	1700.C
BTI-1700M	200x200x300mm (8"x8"x12")	1700.C
BTI-1700M	250x250x300mm (10"x10"x12")	1700.C
BTI-1700M	300x300x400mm (12"x12"x16")	1700.C
BTI-1700M	350x350x400mm (14"x14"x16")	1700.C
BTI-1700M	400x400x400mm (16"x16"x16")	1700.C
BTI-1700M	500x500x500mm (20"x20"x20")	1700.C

Bio-Gene Natural Convection Oven India	Forced Convection Oven Manucacturer
Industrial Forced Convection Oven Ii Supplier	Bio-Gene Clean Air Oven India
Vacuum Drying Oven Supplier India