Bio Gene Cooling Incubator Shaker, Orbital Shaker, Cooing Shaking Incubator Shaker
(CE, ISO & GMP Certified)
1. Cooling Orbital Shaker outer body made of CRC Sheet duly powder coated.
2. Our Cooling Orbital Incubator Shaker has inner Chamber made of thick stainless steel sheet (SS-304 grade).
3. Top lid is made up of transparent see through plexi glass of out cooling shaker.
4. Variable speed rotary shaker platform is fitted with IMPORTED DC DRIVEN MOTOR for continuos operation in our cooling orbital shaker.
5. Fitted with MICROPROCESSOR DIGITAL RPM/SPEED INDICATOR in the rotary shaker.
6. Cooling Shaker shaking platform can accommodate 16 flasks of 250/500ml or 25 flask of 100ml or 36 flasks of 50ml. (One set of clamps provided with the unit as a standard accessory)
7. Shaking platform of our cooking orbital shaker is provided at the base of incubator so as to shake Erlenmeyer flasks.
8. The variable speed motor is fitted outside inner chamber, at the base.
9. The complete unit is mounted on a sturdy angle iron frame in our cooling orbital shaker.
10. These units are fitted with hermetically sealed compressor for cooling effects in our cooling incubator shaker.
11. PID control with pulse width modulation for heat control is also proviedin our cooling incubator shaker as optional.
12. Safety cut out device for temperature overshoot in case digital temperature controller fails in the cooling rotary incubator shaker.
13. Fitted with Microprocessor Based PID Digital Temperature Indicator cum Controller to control the temperature from 5°C to 70°C +0.5°C in the cooling orbital incubator shaker.
14. The unit is fitted with air circulation fan for temperature uniformity in the rotary cooling incubator shaker.
15. Inner Chamber size at base : 400 x 400 mm, 450 x 450 mm, 600 x 600 mm.
16. Shaking Platform size: 300 x 300 mm, 425 x 425 mm, 500 x 500mm.
17. To work on 220 / 230 volts A.C. Supply.
(a) SPEED RANGE 50-250rpm.
(b) SPEED RANGE 50-350rpm.
Optional Accessories of Cooling Incubator Shaker
(a) Spare set of lotus clamps made of S.S. for holding conical flasks in the shaker.
For Flask Capacity 100/50 ml.
For Flask Capacity 150 ml.
For Flask Capacity 250ml.
For Flask Capacity 500ml.
For Flask Capacity 1000ml.
(b) Interior illumination arrangement for daylight/photosynthetic application with light bank consisting of fluorescent lamps and programmable 24hrs timer with real time clock to cost extra in our
cooling shaker.
(c) Gas purging facility is available in our
cooling shaker to cost extra .
(d) HEPA FILTER at port for gas/air/CO2 purging is available in our
cooling shaker to cost extra.
(e) Communication port for PC INTERPHASE for logging DATA to your personal computer for taking prints through a printer as and when required. With software on Compact Disc.
