Bio Gene especially precise, environmentally-friendly, energy-saving heating and cooling system with Peltier technology is used in the Bio Gene cooled incubator.
Heating and cooling in a single system: If a voltage is placed across a Peltier element, one side is cooled and the opposite side simultaneously heats up. Simply by reversing the polarity of the supply voltage, the hot and cold sides of the Peltier element can be swapped.
Bio Gene especially precise, environmentally-friendly, energy-saving heating and cooling system with Peltier technology is used in the Bio Gene cooled incubator.
Heating and cooling in a single system: If a voltage is placed across a Peltier element, one side is cooled and the opposite side simultaneously heats up. Simply by reversing the polarity of the supply voltage, the hot and cold sides of the Peltier element can be swapped.
Bio Gene® PELTIER INCUBATOR are widely used in
Bio Gene Peltier Cooled Incubator Excellent controllability of in process of cell growth. extremely small control fluctuations, low-vibration operation and impressive energy savings provide the added value from this perfect adaptation of Peltier technology. With its extensive range of appliances with Peltier elements for heating and cooling – such as the CKD Peltier-cooled incubator
BIOGENE PELTIER Incubator are double walled Peltier heated units.
Outer body of our incubators is constructed out of Stainless Steel sheet.
The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade with Corners to avoid the contamination getting accumulated in the corners and colonies getting generated.
PELTIER COOLED INCUBATOR DOORS
The unit is provided Double doors.
The outer door is made of mild steel sheet lined with stainless steel from inside.
Inner Door is made of Single Pieces Tampered Safety Glass without any Metallic frame to view the specimens without disturbing the temperature of the chamber.
Inbuilt Validation Port: Bio Gene PELTIER Incubator is provided with Inbuilt Validation Port to ensure routine calibration. This also ensures to avoid gasket damage during validation.
Door Gasket: BIOGENE PELTIER Incubators are supplied with SPECIAL MAGNETIC GASKET for positive sealing.
Castor Wheels: Bio Gene PELTIER Incubator has heavy duty PU casters with floor mounted for easy movement inside the laboratory.
Stainless steel shelves. The unit is provided with three stainless steel shelves made of Stainless Steel Wire Mesh.
Bio Gene PELTIER Incubator cooling system with State of Art design coil system:
An energy efficient cooling unit is installed in our PELTIER incubators to enable Constant Incubator studies at lower room temperatures.
Bio Gene Peltier-cooled incubator offers minimum energy consumption with maximum benefit to the environment, as in contrast to compressor technology, energy is only required when you need to heat or cool down.
The working chamber of the BTI is completely sealed off from the environment. The advantages for you: minimal risk of the sample drying out, condensation formation during the cooling down process takes place outside the working chamber on the Peltier element. Another valuable bonus: since the BTI cooled incubator does not need a compressor, it saves space in the laboratory.
FORCED AIR CIRCULATION: Bio Gene PELTIER Incubator are designed to perform high performance with uniform temperature control maintained by rear mounted silent blower fan to produce forced air circulation there by generating uniform temperature all through the chamber.
ILLUMINATION:
Our units are provided with door operated illumination system comprising of fluorescent lights. Interior Illumination with Fluorescent tubes when door opens.
Latching and leveling Screws: latching and leveling Screws for ease movement and placement.
ALARM: Bio Gene PELTIER Incubator has Floating overshoot/undershoot alarm facility.
| MODEL NO- BTI | PCI-112 | PCI-171 | PCI-280 | PCI-340 | PCI-450 |
| Parameter | Specification | ||||
| Make | Bio Gene | ||||
| Internal body type | Double walled | ||||
| Temperature range | 5°C to 60°C ± 0.5°C (Standard) | ||||
| Temperature Sensitivity | ± 0.5 °C | ||||
| Spatial Deviation | ± 0.5 °C | ||||
| Readability | ± 0.5 °C | ||||
| Temperature Sensor | PT-100 | ||||
| Temperature Controller | Digital Controller | ||||
| Display | LED | ||||
| Tray | 02 Nos – 05 Nos | ||||
| Nominal power | 1050 watt | ||||
| Nominal voltage | 220-230 Volts, 50Hz Single Phase | ||||
| CAPACITY - LTRS | 112 | 171 | 280 | 340 | 450 |
Related Products
